seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Replacing front reading lights W13 and W19 > < Front interior lightW1
Removing and installing front interior lightW1
Removing and installing front interior light -W1-
  Note
The following illustrations show removal and installation of the front interior light -W1- on a vehicle with sliding/tilting sunroof. Removal and installation of front interior light -W1- on vehicles without sliding/tilting sunroof are carried out in the same way.
Special tools and workshop equipment required
   
t  Removal wedge -VAS 3409-
  Note
When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available tape.
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
  W00-0016
–  Lever off trim -1- at fasteners -arrows- using removal wedge -VAS 3409- or suitable screwdriver.
  N96-10750
–  Remove both bolts -arrows- and swivel interior light out of roof console.
  N96-10751
–  Dependant on equipment, release connectors -arrows-, disconnect and remove interior light.
Installing:
Installation is carried out in reverse order.
  N96-10752

Replacing front reading lights W13 and W19 > < Front interior lightW1