seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removal: > < Servicing ultrasonic interior monitor
Ultrasonic sensors for interior monitorG273: removing and installing
Ultrasonic sensors for interior monitor -G273-: removing and installing
Special tools and workshop equipment required
   
t  Lever -U-30800-
  Note
t  In order to remove the interior surveillance disconnection switch -E267- and the deactivation button of the vehicle inclination sender -E360-, the anti-theft alarm system must be deactivated → Chapter.
t  The interior surveillance disconnection switch -E267- and the deactivation button of the vehicle inclination sender -E360- can be found in the B-pillar trim on the driver's side.
Installation location: The interior monitor sensor -G273- is located next to the front interior light / reading light unit.
  W00-2169

Removal: > < Servicing ultrasonic interior monitor