seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Adjusting headlights with gas discharge bulb > < Adapting components, headlights with gas discharge bulbs
Converting headlights for use when driving on the left or right
Converting headlights for use when driving on the left or right
The gas discharge lamp headlights have a setting mechanism which prevents dazzling of oncoming traffic in countries who drive on the left.
  Note!
Depending on manufacturer, either a lever must be repositioned or using an Allen key a sleeve turned.
Converting:
  Caution
Avoid looking directly into the collimated beam as the UV rays from the gas discharge bulb are about 2.5 times greater than that of conventional halogen bulbs.
  Warning
If a headlight with automatic range control is removed, the basic setting of the headlight must always be performed when reinstalling → Chapter.
–  Remove headlight → Chapter.
   
–  Remove bolt -arrow- and remove sealing cover.
  Note!
The sealing cover is secured with one or two screws, depending on the manufacturer of the headlight.
Vehicles with a lever:
  N94-0504
–  Move lever -arrow- to respective position.
Lever down - driving on right.
Lever up - driving on left.
Vehicles with a hexagon socket sleeve:
  N94-0506
–  Carefully turn hexagon socket -arrow- to respective position.
Turn hexagon socket anti-clockwise for driving on the right.
Turn hexagon socket clockwise for driving on the left.
–  Adjust headlight → Chapter.
  N94-10356

Adjusting headlights with gas discharge bulb > < Adapting components, headlights with gas discharge bulbs