seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Renewing side light bulb > < Renewing dipped beam gas discharge bulb

Leon Mk1

Renewing main beam bulb
Renewing main beam bulb
Removing:
–  Remove headlight → Chapter.
   
–  Remove screw -arrow- and remove sealing cover.
  Note!
The sealing cover is secured with one or two screws, depending on the manufacturer of the headlight.
  N94-0504
–  Pull connector -arrow- off bulb.
–  Push spring retainer over locking lugs and release.
–  Pull bulb out of reflector.
Installing:
  Warning
Do not touch bulb glass when fitting a new bulb. Fingers leave traces of grease on the glass, which evaporate when the bulb is switched on and cause the glass to cloud over.
  Note!
Insert new bulb so that the lugs on the disc plate align with the recesses in the reflector.
–  Reconnect connector.
–  Install sealing cover.
–  Always check function of headlight after installing a bulb.
–  Adjust headlight with gas discharge bulb → Chapter.
  N94-0482

Renewing side light bulb > < Renewing dipped beam gas discharge bulb