seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Removing turn signal indicators > < Rear light group and lamp holders: removing and fitting
Removing parking light
Removing parking light
–  Switch off ignition and remove key.
–  Turn light switch to „0“ position.
   
–  Remove both bolts -1- from optical group.
–  Detach electrical connector-2- from bulb holder, and separate optical assembly.
  E94-10008
–  Undo the securing handle -1-.
  E94-10009
–  Remove the two bolts-1- securing the parking light bulb holder to optical group.
  E94-10010
–  Turn bulb one quarter to the left, freeing the bayonet and removing it from holder.
  E94-10011

Removing turn signal indicators > < Rear light group and lamp holders: removing and fitting