seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Rear light group and lamp holders: removing and fitting|Installation > < Removing parking light
Removing turn signal indicators
Removing turn signal indicators
–  Switch off ignition and remove key.
–  Turn light switch to „0“ position.
Te remove turn signal indicator, first remove parking light.
   
–  Rotate bulb holder to the left -arrow- and remove it from optical group. If this is difficult, use a screwdriver on the central area.
  E94-10012
–  Rotate bulb to the left -arrow- and remove from holder.
  E94-10014

Rear light group and lamp holders: removing and fitting|Installation > < Removing parking light