seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fog lights: repairing > < Parking aid - Ibiza ST

Leon Mk1

Removing and installing side mounted repeater turn signal
Removing and installing side mounted repeater turn signal
Removing:
  Note!
Extreme caution must be exercised when removing the side mounted repeater turn signal as removing is only possible in one direction ,and when installed it is not possible to recognise on which side of the turn signal the spring clip or the mounting is located. When using force to remove the light on the spring clip side there is a great danger that the turn signal or the vehicle paintwork surface will be damaged.
–  Switch off ignition and all electrical consumers and remove ignition key.
   
–  Press turn signal with a suitable tool on the mounting side -1- carefully in direction of arrow against the force of the spring clip -2- on the opposite side, and remove (protect paintwork surface with adhesive tape first if necessary).
–  Pull rubber holder with push-fit bulb off bulb housing.
–  Pull push-fit bulb (12V/5W) out of housing (do not turn).
Installing:
–  Fit rubber holder with push-fit bulb onto bulb housing.
–  Insert turn signal in wing.
–  After installing a new bulb check function of turn signals.
  N94-0289

Fog lights: repairing > < Parking aid - Ibiza ST