seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Steering column of the switch module, Vehicles 06/2010 ? > < Parking aid (PDC)
Remove the switch fitted on the steering column
Remove the switch fitted on the steering column
  Caution
Before working on the electrical system, disconnect the battery earth strap.
  Note!
t  Before disconnecting the battery, consult the anti-theft code of the radio.
t  If the battery is reconnected, check the vehicle equipment (radio, clock, power windows) according to the repair manual and/or the instructions for use.
–  Remove the passenger side airbag unit. → Bodywork - Installation work; Rep. Gr.69
   
–  Loosen the Phillips head screws -arrows-.
–  Remove the covering lower for the switch fitted on the steering column.
  N94-0222
–  Remove the connector -arrow- of the reverse unit.
  N94-0223
–  Loosen the hexagonal bolt (50 Nm) -2-.
–  Set the steering wheel -1- at the centre position (with the wheels straight).
–  Remove the steering wheel -1- from the steering column.
  N94-0228
–  Remove the covering upper of the switch fitted on the steering column -1-.
–  Loosen the three fixing nuts -arrows-.
  N94-0229
–  Remove the connectors -arrows- of the switch fitted on the steering column.
–  Remove downwards the casing of plug -1- in the antitheft casing lock from the guide.
–  Remove the switch fitted on the steering column.
  N94-0230

Steering column of the switch module, Vehicles 06/2010 ? > < Parking aid (PDC)