Leon Mk1
installation diagram |
1 - | Bracket for ancillaries |
2 - | Hexagonal nut |
q | M8 |
3 - | Hexagonal bolts with collar |
q | M10 x 55 |
q | 45 Nm |
4 - | Cross-head bolt |
q | M5 x 21 |
q | 4.5 Nm |
5 - | Boot |
6 - | Hexagonal nut |
q | M8 |
q | 15 Nm |
7 - | Hexagon nut with collar |
q | M8 |
q | 25 Nm |
8 - | Star-head screw |
q | M4 x 18 |
q | 2 Nm |
9 - | Voltage regulator |
q | Remove and install voltage regulator → Chapter |
10 - | Hexagonal nut |
q | M8 |
11 - | Alternator |
q | Alternator: removing and fitting → Chapter |
q | Removal and installation of the poly V belt pulley on the alternator → Chapter |
q | Check alternator → Chapter |
q | Fixing the battery's positive cable to the alternator → Chapter |
12 - | Poly-V belt |
q | Routing of poly V-belt → Engine assembly; Rep. Gr.13. |
q | Check poly-V belt → Chapter |
13 - | Hexagonal bolts with collar |
q | M8 x 85 |
q | 23 Nm |
14 - | Tensioning roller |
15 - | Hexagonal bolts with collar |
q | M8 x 60 |
q | 25 Nm |
|