Checking and servicing alternator

Make

SEAT

Model

Leon Mk1

Section

Electrical system › Starter-current supply-CC › Checking and servicing alternator

Vehicle electricsChecking and servicing alternator

Pulley for Poly-V belt with free sprocket: removing and fitting Special tools and workshop equipment required

t  Adapter -3400- t  8 mm hexagon socket or TORX T50 socket

Removal: –  Remove alternator → Chapter –  If fitted, press off protective cap on alternator pulley. –  Counterhold the pulley with multi-tooth adapter -3400- and rotate alternator shaft clockwise, in order to release it. Installation Installation is carried out in reverse order, noting the following: –  Turn alternator shaft anti-clockwise to tighten. –  Clip in the protective cap to the belt pulley of the alternator. Tightening torque

Components:	Nm
Poly-V belt pulley with free-wheel to alternator	80

06 General

The same page in: Leon Mk2.