Leon Mk1
| installation diagram |
| 1 - | Hexagonal bolts with collar |
| q | M8 x 50 |
| q | 20 Nm + ¼ turn (90°) more |
| 2 - | Hexagonal bolts with collar |
| q | M10 x 45 |
| q | 40 Nm |
| q | Observe the tightening torque → Chapter |
| 3 - | Star-head screw |
| q | M4 x 18 |
| q | 2 Nm |
| 4 - | Hexagonal nut |
| q | M8 |
| q | 15 Nm |
| 5 - | Hexagon nut with collar |
| q | M8 |
| q | 25 Nm |
| 6 - | Cross-head bolt |
| q | M5 x 21 |
| q | 4.5 Nm |
| 7 - | Voltage regulator |
| q | Remove and install voltage regulator → Chapter |
| 8 - | Boot |
| 9 - | Alternator |
| q | Alternator: removing and fitting → Chapter |
| q | Removal and installation of the poly V belt pulley on the alternator → Chapter |
| q | Check alternator → Chapter |
| q | Fixing the battery's positive cable to the alternator → Chapter |
| 10 - | Poly-V belt |
| q | Routing of poly V-belt → Engine assembly; Rep. Gr.13. |
| q | Check poly-V belt → Chapter |
| 11 - | Tensioning tool |
| 12 - | Hexagonal bolts with collar |
| q | M8 x 90 |
| q | 23 Nm |
| 13 - | Bracket for ancillaries |
| q | Observe the tightening torque → Chapter |
|
