SEAT Workshop Service and Repair Manuals

Remove the pin and replace the connector housing Special tools and workshop equipment required

t  Wedge -U 30800-

t  Case for repairing the cables -VAS 1978A- t  Extractor -VAS 1978/35-2- t  Extractor -VAS 1978/35-13- t  Extractor -VAS 1978/35-18- For replacing, proceed as follows: –  Remove the steering column switch → Electrical system; Rep. Gr.94

–  When installed, the cable tie -1- must be opened.

–  Loosen the fuses -arrows 1 and 2- and open the locking tab using the wedge to aid dismounting -U 30800--arrow 3-.

–  Remove the retainer in -the direction of the arrow-.

–  Remove the pins at positions -1 to 14- and -32 to 37- using the Release tool -VAS 1978/35-2-.

–  Remove the pins at positions -15 to 31- using the Release tool -VAS 1978/35-18-. –  Remove the pins at positions -38 to 41- using the Release tool -VAS 1978/35-13-.