seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Contact corrosion! > < Relay carrier
Removing and installing relay carrier on left of dash panel
Removing and installing relay carrier on left of dash panel
Removing:
–  Disconnect battery . → Chapter
–  Remove knee airbag → General body repairs, interior; Rep. gr.69
–  Remove fuse holder → Chapter.
–  Remove onboard supply control unit → Chapter.
–  Dismantling dash panel insert.
–  Remove park assist steering control unit -J791-.
–  Remove loudspeaker for parking aid -R169-.
   
–  Unscrew both securing nuts -arrows- and lower relay carrier -1- downwards.
–  Pull off relays and fuses (number will vary depending on equipment level) and remove relay carrier downwards.
Installing:
Installation is carried out in the reverse sequence; note the following:
–  Tighten securing nuts to 4.5 Nm.
  N97-11960

Contact corrosion! > < Relay carrier