seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Releasing and dismantling connector housings > < Vehicle diagnostic, testing and information system of the LPG system (Liquefied gas), ?11.2010
Vehicle diagnostic, testing and information system LPG ►11.2010: connecting
Vehicle diagnostic, testing and information system LPG ►11.2010: connecting
–  The connection is located to the right on the plenum chamber on the side of the compensation tank.
   
–  Remove the protective cap -1- from the lug connector.
–  Connect the Wiring harness for autogas diagnosis (No. JNV 971603 in the Spare parts catalogue).
–  Connecting the vehicle diagnostic, testing and information system -VAS 505X-
–  Install the CD-ROM with LPG diagnosis software JNV 910787, reference in the electronic spare parts catalogue:
Procedure:
–  After inserting the CD select „Setup.exe“ to execute.
–  Select the language for installing.
–  Follow the steps specified in the installation program.
–  Acknowledge the installation of the Java 2 Runtime Environment application.
–  After being installed correctly, the direct access „BIFUEL SOFTWARE“ will be setup on the desktop.
–  Execute the „BIFUEL SOFTWARE“ direct access.
–  Select the program language under the flag „Language“.
  E97-10385
F1Select control unit
F2Program control unit
F3Connection
F4Load configuration
F5Configuration of the vehicle
F6Diagnostics
F7Data recording
F8Save configuration
F9Automatic update
F10Output

–  Start the engine.
l  Coolant temperature over 30°
l  Engine speed from 1200 rpm
   
–  Turn the switch -1- for gas to „ON“.
–  Press the button F3 to establish connection with the device (the state of connection is displayed at the bottom right side of the screen).
–  Press the F6 button to start the self diagnosis.
–  When errors are registered, use → Current flow diagrams, Electrical fault finding and Fitting locations, to solve the error, press the „RESET“ button, to check if the error has been solved, press the „Start“ button.
  Note
Further information can be obtained under → Technical instructionsBifuel LPGNº 30/09, → Current flow diagrams, Electrical fault finding and Fitting locations, → Instruction manual → Vehicle diagnostic tester
  E96-10150

Releasing and dismantling connector housings > < Vehicle diagnostic, testing and information system of the LPG system (Liquefied gas), ?11.2010