SEAT Workshop Service and Repair Manuals > Leon Mk1 > Vehicle electrics | Radio, Telephone, Navigation | Infotainment | Telephone system | Bluetooth unit: Removing and installing | Telephone transmitter and receiver unitR36 (fixed installation telephone)

Telephone transmitter and receiver unitR36 (fixed installation telephone)

Telephone transmitter and receiver unit -R36- (fixed installation telephone)

–	Switch off all electrical components.

–	Remove the ignition key.

Removal:

–	Remove A-pillar trim (right-side): → General body repairs, interior; Rep. gr.70.

–	Remove front seat (right-side) → General body repairs, interior; Rep. gr.72.

Note

Seat belt at seat frame does not have to be unfastened.

–	Fold back floor covering → General body repairs, interior; Rep. gr.70.

–	Release cover for electronics box -arrows- and remove cover.

–	The connector-2- of thetransmitting and receiving device for telephone -R36-, -3- plus disconnect the plug fuse. -Arrow-

–	Remove theBluetooth-Antenna -R152--1- a possible fracture in the handling should be avoided.

If the Bluetooth device is to be processed remove Bluetooth-Antenna -R152--1- in order to avoid a possible break.

Installation

–	Installation is performed in reverse sequence.

–	If necessary, execute the adjustments and coding on the transmitting and receiving device for phone -R36- → Vehicle diagnostic tester

SEAT Workshop Service and Repair Manuals