Workshop Manuals Factory service & repair SEAT
01 Power transmission02 Running gear03 Body04 Power tramsmission05 Power unit06 Vehicle electrics07 Heating-ventilation-air conditioning system08 Automatic gearbox09 Engine, mixture preparation10 Engine, mechanics11 Manual gearbox12 Running gear - self diagnosis13 Heating and air conditioning14 Bodywork15 Heating, ventilation, air conditioning system
SEAT Leon Mk106 · Vehicle electrics
06 · General

CD changer

Make
SEAT
Model
Leon Mk1
Section
Radio, Telephone, Navigation › Infotainment › CD changer
Vehicle electricsCD changer
Removing
   
–  Remove the interior tray supported by the two Torx bolts -arrows-.
  E91-0129
–  Extract the upper interior cover of the glove compartment held in place by four Torx bolts -arrows-.
  E91-0130
–  Remove the lower tray from the glove compartment in the foot well, held in place by four Torx bolts -arrows- and a pressure anchor -1-.
  E91-0131
–  With the cover of the glove compartment closed, extract the bolts that hold the CD changer bracket -arrows-, these are also Torx bolts.
  E91-0132
–  Unscrew the Torx bolts holding the CD changer bracket on the inside of the glove compartment -arrows-.
–  Pull the bracket and CD changer towards the passenger compartment, ensure that the electrical connection is released from its bracket and disconnect it, guiding it through the opening in the rear of the CD changer.
Once the CD changer is removed with its bracket then the bracket may be removed:
  E91-0133
–  Remove bolts 1- - from both sides.
  E91-0134

The same page in: Leon Mk2.

Parts & tools for this job For SEAT Leon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.