seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Notes on operating mobile telephones and two-way radios > < multimedia system display module RSE Ultra-Low: removal and installation

Leon Mk1

Removing:
Removing:
Before beginning with the assembly work, the following sequences must be carried out:
–  Disconnect ignition and all electrical loads, and remove ignition key.
–  Remove any CD's left in the equipment → Owner's Manual.
   
Carry out the following procedure:
–  Carefully remove the frame around the radio navigation unit -arrows-, so that the screws of the front of the radio navigation unit can be reached, →  Bodywork-fitting work; Rep. gr.68.
  E91-10137
–  Unscrew bolts -arrows-.
–  Remove the radio / navigation unit from its housing until the connections at the rear of the device can be reached.
  E91-10138
–  Press connector locking element in direction indicated by -arrows-.
–  Move retainer plate in direction of the -arrow-, and detach the plug connector.
  E91-10140
–  Release the connectors of the aerial connection for radio tuning-arrow- and the aerial connection for navigation -arrow- and remove them
  E91-10139

Notes on operating mobile telephones and two-way radios > < multimedia system display module RSE Ultra-Low: removal and installation