Workshop Manuals Factory service & repair SEAT
01 Power transmission02 Running gear03 Body04 Power tramsmission05 Power unit06 Vehicle electrics07 Heating-ventilation-air conditioning system08 Automatic gearbox09 Engine, mixture preparation10 Engine, mechanics11 Manual gearbox12 Running gear - self diagnosis13 Heating and air conditioning14 Bodywork15 Heating, ventilation, air conditioning system
SEAT Leon Mk106 · Vehicle electrics
06 · General

Sound system

Make
SEAT
Model
Leon Mk1
Section
Radio, Telephone, Navigation › Infotainment › Sound system
Vehicle electricsSound system
Removing and installing front treble loudspeaker
Sound system – SEAT Leon Mk1  Note
Removal and installation is performed in the same manner on the left and right sides.
Removal:
Before beginning dismantling work, perform the following steps:
–  Switch off ignition and all electrical consumers, and remove ignition key.
In order to replace a loudspeaker, the A-pillar trim must first be removed → Trims/insulation; Rep. gr.70
   
–  Detach connector -1- from treble loudspeaker -2-.
Installation
Sound system – SEAT Leon Mk1  Note
The treble loudspeaker and the A-pillar trim are installed as a unit and therefore can only be renewed together. Note trim colour number when ordering spare part.
Installation is carried out in the reverse sequence of removal.
  N91-11886

The same page in: Leon Mk2.

Parts & tools for this job For SEAT Leon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.