Workshop Manuals Factory service & repair SEAT
01 Power transmission02 Running gear03 Body04 Power tramsmission05 Power unit06 Vehicle electrics07 Heating-ventilation-air conditioning system08 Automatic gearbox09 Engine, mixture preparation10 Engine, mechanics11 Manual gearbox12 Running gear - self diagnosis13 Heating and air conditioning14 Bodywork15 Heating, ventilation, air conditioning system
SEAT Leon Mk106 · Vehicle electrics
06 · General

Loudspeaker systems

Make
SEAT
Model
Leon Mk1
Section
Radio, Telephone, Navigation › Infotainment › Loudspeaker systems
Vehicle electricsLoudspeaker systems
Removing:
Loudspeaker systems – SEAT Leon Mk1  Note
Removal and installation is performed in the same manner on the left and right sides.
Carry out the following work:
–  Turn off the ignition and all electricity consumers.
Remove door trim → General body repairs, interior; Rep. gr.70.
   
–  Drill out rivets -arrows- with a suitable drill bit and take out loudspeaker.
Loudspeaker systems – SEAT Leon Mk1  Note
t  It is essential that all swarf be removed from the door because otherwise corrosion damage will occur.
t  Please rectify any paintwork damage caused when drilling out the rivets immediately.
–  Release locking mechanism of connector at removed loudspeaker and pull out connector.
  N91-11488

The same page in: Leon Mk2.

Parts & tools for this job For SEAT Leon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.