seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Installation overview- Installation location, Exeo model > < Connectors and contact holes
Telephone transmitter and receiver unitR36
Telephone transmitter and receiver unit -R36-
   
Connectors
A - Connection (yellow) for aerial for Bluetooth -R152-
B - Multi-pin connector, 54-pin, black
  Note
Contacts which are not listed are not used.
  E91-10400
B - Multi-pin connector, 54-pin, black
1 - Terminal 30
2 - Terminal 31
8 - NF+ (low frequency) to radio -R- / navigation system with CD drive control unit -J401-
9 - NF– (low frequency) to radio -R- / navigation system with CD drive control unit -J401-
10 - Terminal 31 screen earth (not used)
11 - Microphone input (+) to telephone microphone -R38- / navigation system with CD drive control unit -J401-
12 - Microphone input (-) to telephone microphone -R38- / navigation system with CD drive control unit -J401-
15 - K diagnosis
16 - NF mute (low frequency) to radio -R- / navigation system with CD drive control unit -J401-
17 - CAN-BUS High (Infotainment)
18 - CAN Bus Low (Infotainment)
37 - Terminal 30 to telephone bracket -R126-
39 - Terminal 31 to telephone bracket -R126-
41 - Terminal 30 to telephone bracket -R126-
42 - Microphone output (+) to telephone bracket -R126-
43 - Microphone output (-) to telephone bracket -R126-
44 - Terminal 31 (screen earth)
45 - NF input (+) (low frequency) from telephone bracket -R126-
46 - NF input (-) (low frequency) from telephone bracket -R126-
47 - SNDREQ signal from telephone bracket -R126-
49 - Ser-Tx (+) to telephone bracket -R126-
50 - Ser-Tx (-) to telephone bracket -R126-
51 - Ser-Rx (+) from telephone bracket -R126-
52 - Ser-Rx (-) from telephone bracket -R126-
  E91-10356

Installation overview- Installation location, Exeo model > < Connectors and contact holes