seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Bluetooth unit: Removing and installing > < Telephone bracketR126: Removing and installing

Leon Mk1

Telephone bracketR126 mounted on the dash panel
   
Telephone bracket -R126- mounted on the dash panel
1 - Mounting
q   installed in centre console from the rear
2 - Central console
q   With openings for base plate
q   Making cut-outs → General body repairs, interior; Rep. gr.68
3 - Mounting plate
4 - Base plate
q   For handset / cradle
5 - 1 Nm
6 - 2 Nm
7 - Multi-pin connector, 12-pin, black (T12)
q   Ensure that connector is correctly fitted.

   
Multi-pin connector, 12-pin, black (T12)
1 - Ser TX (+) to telephone transmitter and receiver unit -R36-
2 - Terminal 30 from telephone transmitter and receiver unit -R36-
3 - Ser Rx (+) from telephone transmitter and receiver unit -R36-
4 - Terminal 31 from telephone transmitter and receiver unit -R36-
5 - Microphone input (+) from telephone transmitter and receiver unit -R36-
6 - NF+ (low frequency) to telephone transmitter and receiver unit -R36-
7 - Ser TX (-) to telephone transmitter and receiver unit -R36-
8 - Terminal 30 from telephone transmitter and receiver unit -R36-
9 - Ser Rx (-) from telephone transmitter and receiver unit -R36-
10 - SNDREQ signal to telephone transmitter and receiver unit -R36-
11 - Microphone input (+) from telephone transmitter and receiver unit -R36-
12 - NF- (low frequency) to telephone transmitter and receiver unit -R36-
  A91-10753

Bluetooth unit: Removing and installing > < Telephone bracketR126: Removing and installing