SEAT Workshop Service and Repair Manuals > Leon Mk2 > 085 5-speed manual gearbox | Clutch, control | Clutch actioning: repairing | Clutch pedal: Removing and installing

Removing

–	With the ignition switched off, disconnect the battery earth strap.

Note!

For vehicles fitted with a coded radio, first check the anti-theft code.

–	Remove shelf and footwell cover on the driver's side: → Bodywork repairs, installation work, interior; Rep. Gr.68.

–	Unbolt the relay plate and move aside.

Vehicles with automatic adjustment clutch cables

–	Tension the clutch cable and remove it from the gearbox → Chapter.

Right hand drive vehicles

–	Remove clutch cable from gearbox → Chapter.

Continued for all vehicles

–	Remove the cables from their housings, on the protective cover of the clutch pedal.

–	Remove the bracket block cover, pressing the tab -arrow 1- and pulling the cover upwards -arrow 2-.

–	Release the cable from the clutch pedal -arrow-.

–	Loosen the hexagon bolt -arrow 1- from the brake and clutch pedal shaft and remove with its washer.

–	Carefully remove the pedal shaft -arrow 2-. While keeping the brake pedal in its position from the right -arrow 1- using a punch.

Caution

Do not move the brake pedal or the steering column. These have no support once the pedal shaft has been removed.

SEAT Workshop Service and Repair Manuals