seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Clutch pedal: removing and fitting > < Removing

Leon Mk2

Installation
Installation
–  Move the clutch pedal to the highest position, to the dashboard.
–  Place the over-centre spring in its seating, next to the clutch pedal bracket.
–  Lightly squeeze the spring assembly and sit it on the clutch pedal.
–  Secure the clutch pedal to the operating rod of the control cylinder as described below:
   
–  The allotment -A- must be on the operating rod -B- of the clutch master cylinder.
–  Fasten actuation rod -B- and press clutch pedal in -direction of arrow- into mount. Ensure that the actuation rod is seated correctly in clutch pedal.
–  Sometimes, in order to fit the allotment it is necessary to remove the securing nut from the clutch pedal and gently move the attachment screw on the pedal bracket to give the clutch pedal greater axial clearance.
–  Tighten the nut.
–  Insert clutch pedal switch into mount and turn 90º to right.
  V30-0419

Clutch pedal: removing and fitting > < Removing