Leon Mk2
| Clutch housing - assembly overview |
| 1 - | Countersunk bolt |
| q | 25 Nm |
| q | To fit in position, the flanged shaft must be bolted to the gearbox |
| 2 - | Flange shaft with compression spring |
| q | removing and fitting → Chapter |
| q | Pre-assembly → Chapter |
| 3 - | Bolt |
| q | 5 Nm + further 1/4 (90°) |
| q | replace |
| 4 - | clutch housing |
| q | removing and fitting → Chapter |
| q | Repairs → Chapter |
| 5 - | Gearbox |
| q | Repairs → Chapter |
| 6 - | Clutch release lever |
| q | With guide sleeve and clutch release collar |
| q | removing and fitting → Chapter |
| 7 - | Bolts |
| q | 5 Nm + further 1/4 (90°) |
| q | replace |
