seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Total disc thickness ?Stotal? (?S1? + ?S2?): determine > < Shim ?S4?: Re-determine thickness if the bearing housing is renewed

Leon Mk2

Adjusting crown wheel
Adjusting crown wheel
Check the tool and equipment equivalence table according to the applicability between Seat / VW / Audi / Skoda → Chapter
   
(Adjusting differential)
Special tools and workshop equipment required
t  Mandrel -VW 295-
t  Dial gauge extension -VW 382/10-
t  End measuring plate -VW 385/17-
t  Universal bracket for gauge -VW 387-
t  Adjustable measuring lever -VW 388-
t  Clutch press -VW 402-, see equivalent → Anchor

   
t  Compression column -VW 408 A-, see equivalent → Anchor
t  Crown wheel adjusting tool -VW 521-
t  Tube -30 - 14-
t  Thrust blocks -2050-
t  Thrust pad -3005-
t  Torque wrench -V.A.G 1331-, see equivalent → Anchor.
t  Dial gauge
t  30 mm gauge extension

It is necessary to readjust the crown wheel when the following components have been renewed:
Gearbox housing, final drive cover, tapered roller bearings for differential, differential cage or the final drive gear set
Adjustment overview → Chapter
   

Total disc thickness ?Stotal? (?S1? + ?S2?): determine > < Shim ?S4?: Re-determine thickness if the bearing housing is renewed