seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Clutch clearance: adjustment > < Measuring the play for the reverse gear brake -B1-.

Leon Mk2

2nd and 4th gear brake -B2- adjustment
   
2nd and 4th gear brake -B2- adjustment
–  Installing components necessary for 2nd and 4th gear brake adjustment -B2- → Chapter.
1 - Gearbox casing
q   Planet gear installed up to the reverse gear clutch -K2- → Chapter
2 - Adjustment bolt
q   For brake strap -B2-
q   Always replace
q   Place on the moulded part of the brake strap -B2-
3 - Nut
q   45 Nm
4 - Brake strap -B2-
5 - Seal
q   For the ATF pump
6 - ATF pump
q   Disassembling and assembling → Chapter
7 - Bolt
q   20 Nm
8 - Spring
9 - Spring
10 - Brake activating piston for 2nd and 4th gears
q   Place the pressure bar onto the moulded part of the brake strap
11 - Cover
12 - Circlip

   
–  Tighten the ATF pump bolts -arrows-to a torque of 20 Nm.
  N37-0573
Adjusting the brake strap -3-
–  Tighten the adjusting screw -2- to a torque of 5 Nm.
–  Unthread the adjusting screw 2 and a half turns.
–  Tighten nut -1- to a torque of 45 Nm. When doing so, secure the adjusting screw so that it does not turn at the same time.
  E37-10031

Clutch clearance: adjustment > < Measuring the play for the reverse gear brake -B1-.