Leon Mk2
| Subframe lining - assembly overview |
| 1 - | Rear view mirror inner lining |
| q | removing |
| – | Using the lever -U 30800-, pull the cover outwards on the upper part and unclip. |
| q | Installing |
| – | Insert the cover in the bottom retaining tab and clip-in the upper part. |
| 2 - | Plug connection for the electrically adjusted exterior mirror |
| 3 - | Front subframe lining |
| q | Removing and fitting → Chapter |
| 4 - | Attachment bolt |
| q | 4 Nm |
| q | 2 pieces |
| 5 - | Bolt |
| q | 6.5 Nm |
| q | 5 pieces |
| 6 - | Bolt |
| q | 4 Nm |
| q | 2 pieces |
| 7 - | Covering for trim |
| 8 - | Bolt |
| q | 1.2 Nm |
| q | 2 pieces |
| 9 - | Cover for the top plug connector |
| q | Depending on the version → Spare parts catalogue |
| 10 - | Grille for the loudspeakers |
| q | removing |
| – | Pull outwards using the lever -U 30800- until it is detached from its location. |
| 11 - | Door handle cover |
| q | removing |
| – | Using the lever -U 30800-, pull the cover outwards on the upper part and unclip. |
| 12 - | Bolt |
| q | 20 Nm |
| q | 2 pieces |
| 13 - | Door lock |
| q | Removing and fitting → Chapter |
