Leon Mk2
| Electric outside rear view mirror, Altea 2009: General assembly overview |
| 1 - | Exterior mirror glass |
| q | Removing and fitting → Chapter |
| 2 - | Rear-view mirror housing |
| q | Removing and fitting → Chapter |
| 3 - | Rear-view mirror housing |
| q | Removing and fitting → Chapter |
| 4 - | Damper |
| 5 - | Foam rubber |
| 6 - | Foam rubber |
| 7 - | Fastener |
| 8 - | Bolt |
| q | 6 Nm |
| q | 2 pieces |
| 9 - | Cover for the inner trim |
| q | removing |
| – | Using the lever -U 30800-, pull the cover outwards on the upper part and unclip. |
| q | Installing |
| Fit in reverse order from removal, remembering the following: |
| – | Insert the cover in the bottom retaining tab and clip-in the upper part. |
| 10 - | Foam rubber |
| 11 - | Unplug electrical connector. |
| q | removing |
| – | Remove the cover for the inner trim -9-. |
| – | Using the lever -T20043-, pull the bracket outwards on the bottom part and unclip. |
| – | Unplug the electrical connection |
| q | Installing |
| Fit in reverse order to removal. |
| 12 - | Cover for the inner trim |
| q | removing |
| – | Using the lever -U 30800-, pull the cover outwards on the upper part and unclip. |
| q | Installing |
| Fit in reverse order from removal, remembering the following: |
| – | Insert the cover in the bottom retaining tab and clip-in the upper part. |
