Leon Mk2
Electrically adjusted exterior mirrors - Assembly overview |
1 - | Exterior mirror glass |
q | Removing and fitting → Chapter |
2 - | Rear-view mirror housing |
q | Removing and fitting → Chapter |
3 - | Fastener |
4 - | Bolt |
q | 6 Nm |
q | 2 pieces |
5 - | Electrical connector |
6 - | Cover for the inner trim |
q | removing |
– | Using the lever -U 30800-, pull the cover outwards on the upper part and unclip. |
q | Installing |
Fit in reverse order from removal, remembering the following: |
– | Insert the cover in the bottom retaining tab and clip-in the upper part. |
7 - | Unplug electrical connector. |
q | removing |
– | Using the lever -T20043-, pull the bracket outwards on the bottom part and unclip. |
– | Detach the electrical connector -5-. |
q | Installing |
Fit in reverse order to removal. |
8 - | Cover for the inner trim |
q | removing |
– | Using the lever -U 30800-, pull the cover outwards on the upper part and unclip. |
q | Installing |
Fit in reverse order from removal, remembering the following: |
– | Insert the cover in the bottom retaining tab and clip-in the upper part. |