Leon Mk2
Adjusting sliding doors - overview |
Note
t | For adjustment, vehicle must be resting on its wheels. |
t | Only adjustment for the left sliding door is described. Adjustment of the right sliding door is analogous. |
t | The sliding door is adjusted correctly if the shut lines/gaps are uniform all around, the door is not too deep or too high and all contours align when door is closed → Rep. gr.00. |
1 - | Sliding door |
q | Adjusting height → Chapter |
q | Adjusting flushness → Chapter. |
q | Adjusting shut line → Chapter |
2 - | Upper roller guide |
q | Adjusting flushness → Chapter. |
3 - | Locating peg |
q | Adjusting → Chapter |
4 - | Catch plate |
q | The catch plates cannot be adjusted. |
5 - | Arrester |
q | The catch is the last component to be fitted. |
6 - | Lower roller guide |
q | Adjusting height → Chapter |
q | Adjusting flushness → Chapter. |
7 - | Rubber buffer |
q | The rubber buffers cannot be adjusted. |
8 - | Door lock |
q | The door lock cannot be adjusted. |
9 - | Hinge |
q | Adjusting height → Chapter |
q | Adjusting shut line → Chapter |
10 - | Slip |
q | Adjusting height → Chapter |
q | Adjusting flushness → Chapter. |