| Child safety seat retainer (Isofix, Top Tether) on rear seat: Install |
| Installation is carried out in reverse order. The following should be taken into account: |
| t
| Mounting bolts Isofix system, tightening torque: 30 ± 3 Nm. |
| t
| Mounting bolts Top Tether-System, tightening torque: 9 ± 0.9 Nm. |
| –
| When fitting fixed rear backrest, slide retaining tabs behind ISOFIX holders -1-. |
| –
| When retrofitting Isofix system it is necessary on some vehicles to press the mounting lugs down to approx. 3 mm in a vice. |
| –
| On installation, ensure clearance from lap belt with automatic belt retractor. Turn lap belt with automatic belt retractor if necessary. |
|
|
|
