Leon Mk2
|
| – | Remove rear bench seat → Chapter. |
| – | Remove the rear seat backrest on the respective side: |
| t | Remove 2/3 rear seat backrest, right-side → Chapter without screwing out the fixing screws of the belt buckle → Item. |
| t | Remove the 1/3 section of rear seat backrest, left side → Chapter. |
| – | Unscrew the screws -2- (2x) with a tightening torque of 30 ± 3 Nm and remove hand handle -1-. |
| Remove Top Tether system |
| 1 - | Top Tether retaining bracket (left-side) |
| 2 - | Bolts |
| q | Tightening torque: 9 ± 0.9 Nm. |
| 3 - | Cover |
| 4 - | Spacer element |
| 5 - | Top Tether retaining bracket (centre) |
| 6 - | Cover |
| 7 - | Guide, left side |
| q | For partition grille |
| q | Depending on equipment version |
| 8 - | Edge protector |
| 9 - | Bolt |
| q | Tightening torque: 9 ± 0.9 Nm. |
| 10 - | Top Tether retaining bracket (right-side) |
| 11 - | Cover |
| 12 - | Guide, right side |
| q | For partition grille |
| q | Depending on equipment version |
| 13 - | Edge protector |
| 14 - | Bolts |
| q | Tightening torque: 9 ± 0.9 Nm. |
