Leon Mk2
|
|
|
|
|
| Removing |
| Vehicles with different luggage compartment floors |
| – | Remove the luggage compartment floor from the vehicle. |
| Continued for all vehicles |
| – | Lever the cap off -5- using the lever -U30800-. |
| – | Remove nuts -4-. |
| – | Remove the cover -3 - and -6 -. |
| – | Remove bolts -1-. |
| – | Completely fold the backrest forwards and remove the left section of the seat -2- from the vehicle with the help of a second mechanic. |
| Installing |
| Installation is carried out in reverse order. The following should be taken into account: |
| – | Screw the nuts and fixing bolts of the 2/3 section of the left rear seat back on in the following sequence: |
| t | Screw in the bolts -1- and nuts -4- in this order. |
| t | Tighten the nuts -4- with a tightening torque of 40 ± 4 Nm. |
| t | Tighten bolt -1- to torque of 60 ± 6 Nm. |
