Leon Mk2
| Assembly overview - bonnet lock release cable |
| 1 - | Cable |
| q | To replace: unscrew release lever and lock, detach cable. |
| 2 - | Self-tapping screw |
| 3 - | Release lever |
| q | Cable attached. |
| 4 - | Spreader nut |
| 5 - | Sealing grommet |
| 6 - | Plugs |
| q | Right-hand drive vehicles only. |
| 7 - | Self-tapping screw |
| 8 - | Bracket |
| q | Certain engines only. |
| 9 - | Anti-theft plate |
| q | Vehicles with appropriate equipment only. |
| 10 - | Hexagon head bolt (self-locking) |
| q | Specified torque: 12 Nm |
| q | If reusing: clean thread of bolt using wire brush and thread of nut using thread chaser; coat bolt with locking fluid -D 185 400 A 2-. |
| 11 - | Release lever for lock |
| 12 - | Guide |
| q | Not fitted on all models. |
| 13 - | Self-tapping screw |
| 14 - | Lock |
| q | Cable attached. |
| q | Adjust within over-sized holes. |
