seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing lock cylinder|Installation > < Removing and installing lock cylinder

Leon Mk2

Removal
Removal
   
–  Clamp the door handle on the ignition key in a vice with protective jaws.
–  Push down paddle -1- in direction of arrow.
–  Take out the lock washer -2-.
–  Remove paddle and spring.
  N57-0299
–  Remove bearing -1- and carrier -2- from the lock cylinder housing.
  N57-0300
–  Rotate the lock cylinder -1- 90°.
–  Make sure that the freewheel sleeve -2- does not rotate with it.
–  Remove lock cylinder.
  N57-0093

Removing and installing lock cylinder|Installation > < Removing and installing lock cylinder