seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Release lever of the rear seat backrest: Removing and installing. > < Cover and padding for the continuous rear seat backrest: Assembly overview

Leon Mk2

Cover and padding for the continuous rear seat backrest: Removing and installing.
Cover and padding for the continuous rear seat backrest: Removing and installing.
Special tools and workshop equipment required
   
t  Hook -3438-
  W00-0379
t  Release lever -U 30800-
Removal:
–  Remove the continuous rear seat backrest → Chapter.
–  Remove the headrest guides → Chapter.
–  Remove the release lever of the rear seat backrest → Chapter.
  W00-2169
–  Hang-out the profile -1- of the frame -2- using the lever -U30800-.
  E74-10115
–  Pull the frame -1- to the outside -arrow- in order to remove it from the padding -2-.
  E74-10116
–  Remove the cover -3- from the padding -1- until you can see the wire -2-.
–  Loosen the wires -2- from their mounts -arrow A- using the hook -3438-.
–  Completely remove upholstery-3-.
Installation
Installation is carried out in reverse order.
  E72-10129

Release lever of the rear seat backrest: Removing and installing. > < Cover and padding for the continuous rear seat backrest: Assembly overview