seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing fuel tank with its attachments and fuel filter > < Checking coolant circulation pump (V50)

Leon Mk2

4-cyl. injection engine (2 valve without intermediate shaft), Mechanics
Removing and installing parts of fuel supply system
Removing and installing parts of fuel supply system

Notes:

  • ◆ Hose connections are secured with either spring-type or clamp-type clips.
 
W00-1107
  • ◆ Always replace clamp-type clips with spring-type clips.
  • ◆ Fuel hoses in engine compartment must only be secured with spring-type clips. The use of clamp or screw-type clips is not permissible.
  • ◆ Assembly tool VAS 5024 or hose clip pliers V.A.G 1921 are recommended for fitting spring-type clips.
  • ◆ The fuel extraction unit VAS 5190 is recommended to empty the fuel tank.

Observe safety precautions.

Observe rules for cleanliness => Page 20-11.

Observe crash fuel shut-off => Page 20-16.

Servicing parts of electronic accelerator control (EPC) => Page 20-29.

Servicing parts of the activated charcoal filter system => Page 20-39.

Removing and installing fuel tank with its attachments and fuel filter > < Checking coolant circulation pump (V50)