Checking the output signal of the High pressure sender (00819) -G65- |
Note! t
| Component locations of the High pressure sender(00819) -G65- differ depending on the engine fitted; for vehicles with 2.0 litre diesel engine it is not fitted on the refrigerant tube from the expansion valve to the condenser; it is fitted instead to the tube from the compressor to the condenser. |
t
| For those vehicles with a 4 cylinder engine, the connector of the High pressure sender (00819) -G65- can be disconnected without any need to first remove other components (access from above). |
|
|
|