SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Air temperature sender, right foot well zone ventG262: Removing and installing. >
< Left temperature flap control motorV158 with potentiometer for left temperature flap control motorG220: Removing and installing.
Leon Mk2
Heating, ventilation, air conditioning system
Heating, air conditioning
Air conditioner
Components of the automatic air conditioning system (Climatronic)
Removing and installing left footwell vent temperature senderG261
Removing and installing left footwell vent temperature senderG261
Removing and installing left footwell vent temperature sender -G261-
Removal:
–
Switch ignition OFF.
–
Remove the bottom section of the steering wheel housing according to the version of the model
→ Bodywork, interior fitting work; Rep. gr.68
.
–
Remove the driver side footwell trim
→ Bodywork, interior fitting work; Rep. gr.68
.
–
Remove the vent from the foot well area on the left side
→ Chapter
.
–
Turn sensor
-A-
by about 90° in direction of the
-arrow-
.
–
Unplug connector
-B-
.
–
Turn sensor
-A-
of the air conditioner in direction of the
-arrow-
.
Installation
Installation is carried out in the reverse order; note the following:
–
When installing, make sure seal
-C-
is correctly seated.
Heating, ventilation, air conditioning system
Heating, air conditioning
Air conditioner
Components of the automatic air conditioning system (Climatronic)
Removing and installing left footwell vent temperature senderG261
Air temperature sender, right foot well zone ventG262: Removing and installing. >
< Left temperature flap control motorV158 with potentiometer for left temperature flap control motorG220: Removing and installing.