On vehicles with radio navigation system or radio with large control panel: |
All other vehicles continued |
–
| Loosen the Climatronic control unit -J255- securing bolts located in the lower part of the control panel. |
–
| Insert a hand underneath (or from above) into the centre console and release the Climatronic control unit -J255- from the centre console. |
–
| Release the Climatronic control unit -J255- connectors by lifting the insert tabs and removing them. |
Note t
| The Climatronic control unit -J255- is secured to the centre console by two bolts. |
t
| Check, in case of a false measurement from the Temperature sensor - dashboard -G56-, the moulding of the Climatronic control unit -J255-, (ensure it is not covered). |
t
| When replacing the Climatronic control unit -J255- note the correct allocation (for example with or without regulator for thermal seats, etc ). → Spare parts catalogue. |
Installation is carried out in reverse order. |
–
| Carry out the basic settings, the coding, adaption and, if necessary, the actuator diagnosis of the Climatronic control unit -J255- → Vehicle diagnostic tester. |
|
|
|