seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Installing > < Removing and installing receiver with dryer cartridge
Removing
Removing
  Note
t  Observe notes → Chapter.
t  The refrigerant must be extracted beforehand, e.g. with air conditioning service station -VAS 6007A- (or later model).
t  The previously used service stations can still be used ⇒ Seat Workshop Equipment catalogue.
t  All of the refrigerant circuit's components that have been opened must be sealed with suitable plugs to prevent the ingress of moisture.
  WARNING
Danger of freezing injuries.
If refrigerant circuit has not been evacuated, refrigerant and refrigerant oil will escape.
Extract refrigerant before opening refrigerant circuit. If the refrigerant circuit is not opened within 10 minutes after it has been evacuated, pressure may develop in refrigerant circuit due to re-evaporation. Extract refrigerant again.
   
–  Extract refrigerant, e.g. with air conditioning service station -VAS 6007A- (or later model) before opening refrigerant circuit.
–  Remove air conditioning system pressure switch -F129- or high-pressure sender -G65--3-.
–  Remove securing bolt for refrigerant pipes -5-.
–  Remove securing bolts -2- and remove receiver with dryer cartridge -1-.
  N87-10357

Installing > < Removing and installing receiver with dryer cartridge