–
| Remove high-pressure sender -G65--C-, tightening torque: 5 Nm |
–
| Replace O-Ring -A- (10.8 mm; 1.8 mm) → Chapter. |
Note t
| Cooling output cannot be checked with high-pressure sender -G65- removed, operating and display unit (Climatronic control unit -J255-) does not switch on compressor. |
t
| The refrigerant circuit remains closed, “connection with valve”. |
t
| Checking the function of the high-pressure sender -G65- and the signal supplied. |
|
|
|