seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Condenser: Removing and fitting|Fitting > < Condenser: Removing and fitting

Leon Mk2

Removing
Removing
–  Empty the refrigerant circuit → Air conditioning - with refrigerant R134a SEAT.
–  Remove the front bumper → Exterior body installation work; Rep. Gr.63.
–  Remove refrigerant pipes from the condenser → Chapter.
–  Place the lock carrier plate into service position →  Bodywork, exterior fitting work ; Rep. Gr.50.
–  Remove the ventilators for the refrigerant -B- with the allotment → Engine, mechanics; Rep. Gr.19
   
–  Remove the bolts -A- and release the radiator (with condenser) -B- from the front module -C- → Engine, mechanics; Rep. Gr.19.
  E87-10021
–  Unscrew the bolts -A- (tightening torque: 5 Nm).
–  Release the condenser -C- from the radiator -D-.
–  Remove the condenser -C- upwards.
  A87-0664

Condenser: Removing and fitting|Fitting > < Condenser: Removing and fitting