seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Refrigerant pipes: remove from and refit on the expansion valve > < Removing

Leon Mk2

Fitting
Fitting
Installation is carried out in the reverse order of removing, noting the following:
Before fitting the tank → Air conditioning - with refrigerant R134a SEAT.
   
–  Clean the support surface of the condenser -C-.
–  Replace all O-ring seals -A- and -B-. Version → Parts catalogue.
  Note
t  Lightly oil the O-rings with oil from the refrigerant circuit just before fitting → Chapter.
  A87-0673
t  Ensure that the O-rings sit correctly into the corresponding tubes or grooves.
t  Cover all open junctions.
t  Keep reservoir closed as long as possible; only remove caps immediately prior to installation (reservoir contains a desiccant bag which soon becomes saturated with moisture and thus unusable when reservoir is open).
  A87-0673

Refrigerant pipes: remove from and refit on the expansion valve > < Removing