seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Install the holder > < Compressor on its holder: Removing and installing

Leon Mk2

Removing the holder
Removing the holder
–  Remove the upper engine protection → Engine, mechanics; Rep. gr.13.
   
–  Remove the centre sound proofing element → Bodywork, exterior fitting work; Rep. gr.50.
  A10-1565
–  Mark the direction of rotation on the Poly-V belt (the diagram shows the position for a 4 cylinder. engine).
–  Release the Poly-V belt (the diagram shows the position for a 4 cylinder engine) and remove → Engine, Mechanics; Rep. gr.13.
  A13-0641
–  Disconnect the connection to the Compressor regulation valve, air conditioning -N280- on pin -1-.
–  Unscrew the attachment bolts -arrows- (25 Nm).
–  Detach the compressor and use wire, for example, to secure it to the vehicle.
  A10-1637

Install the holder > < Compressor on its holder: Removing and installing