Leon Mk2
LuK clutch: repairs |
1 - | Dual-mass flywheel |
q | removing and fitting → Rep. gr.13 |
q | Make sure that the centring pins have a tight fit. |
q | The clutch lining contact surface must be free of scores, oil and grease |
2 - | Clutch plate |
q | Equivalent → Electronic spare parts catalogue (ETKA) |
q | removing and fitting → Chapter |
q | Always replace together with the SAC pressure plate |
q | Installation position: → Fig. |
3 - | SAC pressure plate |
q | SAC means „Self Adjusting Clutch“ |
q | Always replace together with the clutch plate |
q | Equivalent → Electronic spare parts catalogue (ETKA) |
q | removing and fitting → Chapter |
q | Checking ends of diaphragm spring → Fig. |
q | Checking spring connection and rivets → Fig. |
q | Check the position of adjustment mechanism, only when the pressure plate is new → Fig. |
4 - | M6 bolt, 13 Nm, M7 bolt, 20 Nm |
q | Loosen and tighten diagonally in stages |