seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing engine speed senderG28 > < E - Check the fitting position of the sender wheel on the crankshaft.

Leon Mk2

F - Re-pressing sender wheel
F - Re-pressing sender wheel
   
–  Secure the fitting device -T10134- using the Allen bolts -A- to the crankshaft flange.
–  Tighten the two hexagon socket head bolts hand-tight.
–  Slide fitting device -T10134- onto the sealing flange by hand.
  N13-10044
–  Screw hexagon nut -E- onto threaded spindle by hand until it lies on assembly housing -C-.
  N13-10034
–  Tighten hexagon nut of assembly tool -T10134- with torque wrench -V.A.G 1331- and tool insert -V.A.G 1332/11- to 40 Nm.
–  Check the sender wheel installation position on crankshaft again → Chapter.
If dimension -a- is too small again:
–  Tighten hexagon nut of assembly tool -T10134- to 45 Nm.
–  Check the sender wheel installation position on crankshaft again → Chapter.
  N13-10033

Removing and installing engine speed senderG28 > < E - Check the fitting position of the sender wheel on the crankshaft.