Removing and installing parts of cooling system |
Note! t
| When the engine is warm the cooling system is under pressure. If necessary release pressure before commencing repair work. |
t
| Hoses are secured with spring-type clips. In cases of repair only use spring-type clips. |
t
| -T20029- pliers are recommended when installing spring-type clips. |
Check the cooling system for leakage with the -V.A.G 1274- and the -V.A.G 1274/3- adapter. |
Indications on the coolant mix → Chapter, Coolant: drain and add. |
Coolant system components, bodywork side → Chapter |
Coolant system components, engine side → Chapter |
|
|
|