seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
C - Screw on the Fitting deviceT10134 to the crankshaft flange > < A - Mount the seal along with the sender wheel on the assembly toolT10134

Leon Mk2

B - Fit the centre guideT10134 with the sealing flange on the crankshaft flange:
   
B - Fit the centre guide -T10134- with the sealing flange on the crankshaft flange:
l  The crankshaft flange must be free of oil and grease.
l  The engine is in TDC of cylinder 1.
–  Screw the hexagon nut -B- to end of threaded spindle.
–  Press the threaded spindle on the centre guide -T10134- in the -direction of the arrow- until the hexagonal nut -B- sits on the installation bell -A-.
–  Point the flat part of the installation bell towards the sealing surface of the engine block towards the oil sump.
  N13-10045
–  Secure centre guide -T10134- to crankshaft flange by screwing hexagon socket head bolts -A- approx. 5 threads into crankshaft flange.
  N13-10044
–  Screw in the 2 bolts M7×35 -A- on the engine block to guide the sealing flange.
  N13-10031

C - Screw on the Fitting deviceT10134 to the crankshaft flange > < A - Mount the seal along with the sender wheel on the assembly toolT10134