–
| Move the installation bell -C- by hand in the -direction of the arrow- until the sealing lip pressure ring -B- sits on the crankshaft flange -A-. |
–
| Insert the guide pin for diesel engines (black handle) -D- into the crankshaft hole. In this way, the final fitting position of the sender wheel is established. |
Note The guide pin for petrol engines (red handle) -F- cannot be inserted into the threaded hole. |
–
| Hand-tighten both Allen bolts on the fitting device. |
–
| Screw hexagon nut -E- onto threaded spindle by hand until it lies on assembly housing -C-. |
|
|
|